Images |
Description
|
Price + S/H |
Body Parts |
|
|
|
picture1
picture2
picture3
picture4 |
license plate bracket
holder , that holds front license plate and bolts to the the
under side of front bumper, it comes with all the new
necessary mounting hardware , attaching screws and rubber bumper
and mounting clips to attach to under side of bumper , this
bracket will fit 1970 through 1974 barracuda with standard chrome
bumper and the elastomeric "rubber" and also fits dodge
charger 1968 and 1969 ,PN# 2856666 and
number underneath is 30314 this bracket is alot heavier gauge
metal than the repro's and is in good shape being
"36" years old! i got this with a restored elastomeric
bumper , it has been painted and its not perfect ,but the
imperfections will not be noticed! but its the original piece with
the chrysler part ### this piece is not priced much more than the
repro piece and comes with the correct mounting clips. these are
hard to find in any condition!
|
$55.00 |
picture |
(2)
"PLYMOUTH" name plate near NOS shape used on the hoods
and trunk lid from 1968 through 1972 and maybe later? these name
plates have three pegs on the back and black paint is good on the
outer name plate |
$15.00 ea |
picture1
picture2 |
"ORIGINAL"
1970 AAR cuda rear valance panel this piece is in very good shape,
will also fits 1970 through 1974 "Barracuda" and
the Gran Coupe option, NOTE this valance has no cut outs for the
exhaust to go through... (THIS IS NOT A REPRODUCTION
PIECE) you do not have to modify this to
fit! |
$125.00 |
picture |
1972 through 1974
bumper jack with stand this jack might be used on other models,
the only part number i see is PN3163925 it will have to be
restored, but in very good shape.. |
$75.00 |
picture |
1972 through 1974
bumper jack #(2) has no stand "THIS IS THE JACK ONLY) the
stand in the picture is not a mopar jack stand and does not fit
jack! PN3163925 |
$25.00 |
picture |
1970 through 1974
"challenger" rear quarter glass passenger and drivers
side glass, passenger side has some light scratch's but not bad
drivers side is in pretty good shape, they would make good for a
driver, the weather strip or rubber seal is in fair shape for a
driver , the normal wear for a 30 year old piece |
$20.00 ea |
picture
picture
picture |
1972 through 1974
right and left challenger tail light lense assemblies with bezels,
they are in great shape with no cracks, NOTE i will not seperate! |
$110.00 |
Interior Parts |
picture1
picture2 |
"NEW" seat
belt rubber mount covers, which are located on the drive tunnel
inner seat belts where they attach to the floor, they are molded
in "BLACK" , you are buying a pair, (2) these were used
from 1967 through 1970 |
$28.00 |
picture1
picture2 |
original used brake
pedal pad for automatic trans and parking brake pad these pads are
in great shape and show little ware, the brake pad measures on the
back side 2- 3/8"x6-3/8" these pads were used from 1966
through 1970 on all mopar's and maybe other years? |
$15.00 |
picture1
picture2 |
Scuff Plates,
"Challenger Or Cuda" These Will Have To Be Polished Up
To Look Good! But Over All Not Bad Shape, They Are Not Beat Up
Like I Have Seen! They Will Be Great For A Driver! "THE PRICE
IS RIGHT" |
$25.00 |
picture1 |
N.O.S. HEATER CONTROL
CABLE. This will fit 1970-74 Barracudas &Challengers. It is 48" in Length. Part # 2884730 |
$55.00 |
picture
|
"NOS" MoPaR
"SIX PACK" Throttle Cable Fits The 1970 "E" Body
"440" And The "340" Six Pack's T/A And AAR
Will Also Fit The four Barrel Engine... |
$40.00 |
picture |
1971 through 1974
slap stick mechanism with shifter and hump mount, it requires the
"T" shifter handle NOTE this part will also work on the
"B" body also |
$35.00 |
picture |
1970 through 1974
manual windshield washer foot pump it comes with the foot pedal ,
and bracket and the rubber hose and fire wall grommet, i am also
throwing in the deal a washer bottle for a 1972 challenger that
has a crack in the seam, that can be repaired.."NOTE"
this pump was standard with the non rallye dash! |
$45.00 |
picture |
1972 through 1974
"RALLYE STEERING WHEELS" (BUY ONE GET ONE FREE) (1)
wheel is in good shape and the other one is a little rusty..NOTE...will
work on the 70,71 but not original, (there is no horn
buttons) |
$15.00 |
picture |
rallye steering
wheel #2 is for 1972 through 1974 is in good condition with minor
pitting..will work on the 70,71 also but not original..NOTE no
center cap |
$20.00 |
picture |
1972 through 1974 AM
radio is in good shape it worked when removed and lights up and
the buttons work, this radio has 70,71 black knobs on it and i
left the center knobs off by mistake but have them or if you want
the correct chrome knobs i have them also...the only difference in
the AM radios that i see is the knobs, but this radio is out of a
72 challenger.. |
$50.00 |
picture |
1970 and 1971 AM
"black" radio knobs, NOTE if you buy the radio you
may have your choice in style of knobs.. |
$22.50 |
picture |
1970 through 1974
kick panels left and right "BLACK" in color they are in
good shape, but someone has drilled (4) small holes in each panel
for you know what "speakers" they are very small and
would work for a driver, or fill them in? you are buying both
panels |
$25.00 |
picture |
1970 through 1974
very nice drivers side kick panel "BLACK in color ..NO
HOLES |
$35.00 |
picture |
1970 through 1974
driver side lower plastic dash molding that wraps from side of
dash goes under the temp control panel its "BLACK" in
color it has a small hair line crack 1/8 long which will give no
problems and will not be seen under the molding.picture is
marked...other than crack its in great shape! |
$25.00 |
picture |
1970 through 1974 ash
tray and mounting housing ,its needing painted to match your
interior color.. |
$10.00 |
picture1
picture2
picture3 |
Non Rallye Switch
Panel, (2) Speed Wiper Switch , Head Light Switch , And Dimmer
Switch Control, These Switch's Are In Great Shape, They Have Been
Tested As Far As Voltage Only! They Are Very Clean. (THEY ARE SOLD
AS IS) Fits 1970 Through 1974 |
$35.00 |
picture1
picture2
picture3 |
Standard Dash Cluster
For A 1970 Through 1974 Is Very Nice Shape And All Gauges Do Move
And Lense Is In Good Shape , I am Throwing In The Bezel Also! |
$55.00 |
picture1
picture2 |
Standard Dash Cluster
For A 1970 Through 1974 It Has No Clock Plug! And The Lense Is Ok
Its Been Bench Tested And Every thing Moves..You Can Just, Buy It
For The Gauges Or Use For A Driver...Speedo Shows 75,355 |
$35.00 |
picture |
1972 through 1974
speedo #(2) is also a "NON RALLYE DASH" and comes with
lenses and bezel and shows 74,735 miles on the clock, it also has a
seat belt warning lamp in the bezel,it has no broken tabs.... NOTE
all gauges have been bench tested and do move, all faces and
numbers are bright also. |
$50.00 |
picture |
light bar for a
"non rallye dash" |
$25.00 |
Electrical Parts |
picture |
Bulbs For Fender
Mounted Turn signal Indicators, Fits 1966 To 1971, You Are Buying
(2) Bulbs.... |
$6.00 (2) |
picture |
*NEW* DISTRIBUTOR CAP
& ROTOR BUTTON PACKAGE , from the U.S.A. maker for chrysler
corp. these caps are made of very heavy plastic and also have the
good "BRASS" terminals and also have the vent in the top
of the cap! "A MUST FOR PERFORMANCE" *SPECIAL NOTE* this
cap and rotor fits all "A","B" "RB",
HEMI engine's ,late 60's through 80's V8 distributor's , points
and electronic ignition (IT WILL NOT FIT DUAL POINT DISTRIBUTOR'S)
..$15.00 (CAP & ROTOR) PACKAGE OR (2) PACKAGE'S FOR $25.00 .
stock up now! *HURRY* when they are gone there gone! |
$15.00
(1)
CAP & ROTOR SET
|
picture1
|
"NEW"
electronic conversion kit, "FITS ALL V8 ENGINES" includes everything except distributor
. comes with the orange control unit for general high performance
good up to 8,000 RPM"s and also a ballast resistor and the
control unit wiring harness kit, which comes with all terminals
and shrink connectors and long screw to secure harness to control
unit. "I ALSO HAVE BUT NOT INCLUDED IN THIS PACKAGE ,
USED ELECTRONIC DISTRIBUTORS, FOR THE "B" ENGINE AND THE
"A" ENGINE" for a extra $50.00 if interested? |
$65.00 |
|
|
|
picture1
picture2
picture3 |
"NEW" 1970
Cuda' Fender Mounted Turn Signal Lenses For The
"ORIGINAL" 70 Fender Housings...These Were Only
Used One Year Only! "CHECK YOUR BOOKS" They might Have
Been Used On Challengers Also! You Are Buying (2) Lenses,
That Are New....And Correct In Every Way Down To The Brass Threads. No Further Discounts Apply.... |
$60.00 |
picture1
picture2
picture3
picture4 |
1970 through 1972
"B" and "E" Body models .fender Mounted Turn
signal assemblies , includes chrome housings, lenses , wires ,
bulbs, and attaching nut and gasket, they light up and work fine!
one housing has minor webbing, but not bad! you could paint them
to match car! NOTE "these are a little different from the
early 1970 cuda's but will work ..look at pictures closely to see
if they will work for you! NO further discounts apply... |
$150.00 |
picture1
picture2 |
Cuda Or Challenger
1972 through 1974 Fender Mounted Turn Signal Indicator Package
This is a nice, complete original set. Includes chrome lamp hoods,
chrome hood retainer screws, complete, mint lamp housings w/
e-body leads, mint amber lenses (no cracks) & a new pair of
correct lamp bulbs! Original E-body sets like this are becoming
harder to find in this condition. All parts are clean, damage free
& ready to go! Chrome on the hoods show some age, but no pits
or flaking! Set may also fit Dodge Dart, Charger, Superbee
Plymouth Duster, Roadrunner..Please Check Your Numbers! |
$85.00 |
picture |
1970 through 1974
"E" Body "with out air" original blower motor and very nice
squirrel cage and clip ,comes with the metal housing also, the
motor runs very quiet also |
$50.00 |
picture |
NEW mopar license
plate lense with gasket in sealed package, also comes with used
light bezel. SPECIAL NOTE this bezel and lense also fits 1970
through 1974 challenger |
$22.50 |
picture |
NOS new in the box,
ignition switch key reminder switch, fits 70 to 75 "A"
body and 72 to 75 "C" body (with out tilt wheel) and
also "E" body 70 to 74. this is a rare item...PN2947488 |
$25.00 |
picture |
NEW in the package
"ORANGE" mopar performance electronic control unit pn
4120505 |
$35.00 |
picture |
chrome electronic
aftermarket control unit was used for break in purpose |
$10.00 |
picture |
(1) mopar
"BLASTER coil" , it's chrome
and was used for break in purpose , it come's in the original
box PN 4876733 NOTE this coil has no miles on
it..the picture is of the "mopar black coil which i already
sold" it looks like the picture , but chrome! |
$25.00 |
picture |
1970 through 1974
temp control panel with blower switch and levers, switch has been
bench tested and works, the panel is no good. you are buying it
for parts only.. |
$15.00 |